Author	[Modern View]
Tom in Mo. 11-18-2012 16:16:59 75.129.166.207 Report to Moderator	I've said this several times before whenever this topic comes up. My 2010 is a good, reliable machine. It starts evertime, has strong three point and remote hydraulics. I believe any 2010 made after serial number 42000 is probably a good machine. Before 42000 the engineers were very busy. [Reply]   [No Email]
Tx Jim 11-21-2012 12:54:03 67.142.163.21 Report to Moderator	Re: 2010 in reply to Tom in Mo., 11-18-2012 16:16:59   Quoting Removed, click Modern View to see That relates to an old saying "you can't break a good 2010 and you can't repair a BAD 2010" :wink: [Reply]  [No Email]
F-I-T 11-21-2012 10:54:51 184.6.247.3 Report to Moderator	Re: 2010 in reply to Tom in Mo., 11-18-2012 16:16:59   Quoting Removed, click Modern View to see Not knowing anything in particular about these models, I was wondering if there was a similar serial number break where improvements were made on the 1010? [Reply]  [No Email]
buickanddeere 11-21-2012 12:08:04 184.151.63.226 Report to Moderator	Re: 2010 in reply to F-I-T, 11-21-2012 10:54:51   Any gasser 1010 is fine. The transmission and etc were beefed up at serial # 31,001 . Another update at 42,001 updated the hydraulics. I wouldn't mind a gasser 1010 with 540/1000 . Install the diesel deck plate and a custom set of gas pistons. A few other tweaks and annoy the IH pullers with H's. [Reply]  [No Email]
noshow 11-30-2012 07:48:36 192.149.244.9 Report to Moderator	Re: 2010 in reply to buickanddeere, 11-21-2012 12:08:04   Quoting Removed, click Modern View to see Isnt the 1010 diesel the same deck plate as the 2010 gas? [Reply]  [No Email]
F-I-T 11-21-2012 14:58:02 184.6.247.3 Report to Moderator	Re: 2010 in reply to buickanddeere, 11-21-2012 12:08:04   Quoting Removed, click Modern View to see I ask because there is a decent looking 1010 down the road from me sitting behind a local car repair shop. Thought I might inquire about it, though I really don't need one. [Reply]  [No Email]