JD 60 Gov shaft bearings

Anonymous-0 · Nov 14, 2012

Do these come off fairly easy? This shaft has the tach drive on it and betting you can't put much effort against it to take apart. Can a guy press the bevel gear off to remove the bearing or do you press the drive hub off first. thanks chris

Neven · Nov 14, 2012

I just redid my governor on a B and a good press is all you need. I started on the end opposite where the coupling is to the magneto. It came apart with some force on the press. It was actually easier putting it together.

BushogPapa · Nov 14, 2012

Ask on here about Governor Bearings...

I believe there are options to put much Better Bearings in than the originals..

Ron..

Kurt_JDB · Nov 14, 2012

You might want to pick up or borrow a copy of the JD B service manual. SM2004. A really excellent description of how to get these governors apart.

I have a 10 ton press, and it took every bit of it to get the governors on my "37 and "38 B apart. It also takes a little finesse to set it up so you don"t bust a gear.

Kurt

JD 60 Gov shaft bearings

Anonymous-0

Well-known Member

Neven

Member

BushogPapa

Well-known Member

Kurt_JDB

Well-known Member

Similar threads