Threads in Roll-o-Matic

Alright guys,

There is 2 threaded bungs on the front of a roll-o-matic. I was wondering if anyone knew what thread and size these are? I am beginning to beleive its a not so common size.

Thanks
 
(quoted from post at 06:54:45 11/01/12) Alright guys,

There is 2 threaded bungs on the front of a roll-o-matic. I was wondering if anyone knew what thread and size these are? I am beginning to beleive its a not so common size.

Thanks

You mean those two holes used to mount the Roll-a-Matic lock or the mud scraper? 1/2" coarse. In the parts book under the roll-a-matic illustration.
 

I'll second what F-I-T stated. Parts key # 14 19H2473 CAP SCREW 2 1/2" X 1-3/4"
11919.jpg
 
I have the mud scrapers off of a non rollomatie front end. are items 10 and 15 in parts book what I need to attatch scrappes to rollomatic front end? never have seen any attaced in my area. tnks
 
my question is does the part 10 and 15 shown in the parts book used to attach mud scrapers to the rollmatic from end. I have the mud scrappers but not the rite bracket... tnks for you help
 


No, #15 is the lock to keep the roll o matic from moving. #10 holds #15. A mud scraper usually just bolts directly to the center. At least that's what ours did.

Adrian
 
(quoted from post at 08:03:01 11/11/12)

No, #15 is the lock to keep the roll o matic from moving. #10 holds #15. A mud scraper usually just bolts directly to the center. At least that's what ours did.

Adrian

I agree. If you were putting a mud scraper on, 10 and 15 would bve removed.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top