Author	[Modern View]
Farmallb 11-05-2012 13:16:01 67.142.178.20 Report to Moderator	I found the lock ring. Laid it in a safe place I had forgot about. I now need to know if the fan travels clockwise like other tractors or not. [Reply]   [No Email]
rusty wheel 11-05-2012 19:06:40 75.180.23.218 Report to Moderator	Re: What direction does a 39 A fan travel?? in reply to Farmallb, 11-05-2012 13:16:01   You can tell whivch way the fan turns by the pitch of the blades. It's made to pull air through the radiator.   [Reply]  [No Email]
Mark-Ia 11-05-2012 14:44:42 207.177.117.7 Report to Moderator	Re: What direction does a 39 A fan travel?? in reply to Farmallb, 11-05-2012 13:16:01   When standing on the flywheel-side of the tractor, the fan turns counter clockwise. When you install that fanshaft, you will need to put the proper amount of shim gaskets between the fanshaft and gov. housing. To give the gov. gear and fan gear the correct heal and toe clearance to eliminate excessive wear and a really noisy howl........   [Reply]  [No Email]
Farmallb 11-05-2012 16:09:08 67.142.178.23 Report to Moderator	Re: What direction does a 39 A fan travel?? in reply to Mark-Ia, 11-05-2012 14:44:42   Is that shims between the casting on the shaft and the gov, OR between the holding stand and the cast part where the oil goes in, OR both   [Reply]  [No Email]
Mark-Ia 11-05-2012 16:38:42 207.177.117.7 Report to Moderator	Re: What direction does a 39 A fan travel?? in reply to Farmallb, 11-05-2012 16:09:08   There are shims(gaskets) where the fan shaft bolts to the gov. housing. No shims used on the front stand. Download your Free parts manual at JDPARTS   [Reply]  [No Email]
Farmallb 11-05-2012 16:07:07 67.142.178.23 Report to Moderator	Re: What direction does a 39 A fan travel?? in reply to Mark-Ia, 11-05-2012 14:44:42   Is that shims between the casting on the shaft and the gov, OR between the holding stand and the cast part where the oil goes in, OR both   [Reply]  [No Email]