Author	[Modern View]
matthies 10-26-2012 20:55:15 173.224.23.197 Report to Moderator	Was wondering what the number of the manual is so I can order one for the power steering on a JD 60. thanks [Reply]   [No Email]
F-I-T 10-28-2012 06:24:42 184.6.247.3 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to matthies, 10-26-2012 20:55:15   Quoting Removed, click Modern View to see There were a few field installed upgrades that by now might have made it into your '60', so which manual to use could be tricky. When you are ready, take some pictures for us to look at and that can change which book you buy, and how you go about the helix repair/adjustments, etc. Also, I have both the old and new manuals for P/S, and I know I am in the minority here, but if you read, read, read, until you understand it, the I&T book in this case is actually pretty good, in fact I'd say well good enough for the job. Now, that said...what is the problem(s) with your power steering system? I like to break it down into three system components: pump assy, actuator valve, and pedestal group. You can actually do fine operating on them one at a time, or all at once. I have seen many that did not leak but would not otherwise function, fixed in an afternoon by reworking a few points in the actuator valve and making a few critical adjustments. [Reply]  [No Email]
matthies 10-28-2012 07:25:33 173.224.23.197 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to F-I-T, 10-28-2012 06:24:42   The only problem with the system is that the lower seal(where the ROM/steering arm bolts too) is leaking badly. Will leak out in a couple weeks. We have this tractor torn down to overhaul and would like to tackle this now, or how long can the ps pump run without oil? Customer/friend isn't to concerned about it but I hate to go through the engine and then the fan goes through the new radiator or the governor explodes. chris [Reply]  [No Email]
F-I-T 10-28-2012 07:29:18 184.6.247.3 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to matthies, 10-28-2012 07:25:33   Well, the leaking bottom end o-ring seal is the heaviest, but simplest fix in the group. You'll want to study the parts breakdown and order any rubber parts, including vane seals. I don't use the kit they used to sell, as it included too many extras. Look that over and comment back. This post was edited by F-I-T at 07:30:10 10/28/12. [Reply]  [No Email]
Tx Jim 10-28-2012 04:42:34 67.142.163.23 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to Tx Jim, 10-26-2012 20:55:15   matthies I'm not b&d but SM2016 or SM2050. I know you can get one from Davenport Tractors. SKU: DD2050 Weight: 0.67 Price: $11.00 (USD) This post was edited by Tx Jim at 04:44:53 10/28/12. [Reply]  [No Email]
matthies 10-28-2012 07:28:01 173.224.23.197 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to Tx Jim, 10-28-2012 04:42:34   Tx Jim, I only put B&D's request up since he is the one always pushing it, and all I wanted is the SM numbers so my dealer will order them for me. thanks chris [Reply]  [No Email]
4020-101 10-27-2012 17:03:58 66.160.249.247 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to matthies, 10-26-2012 20:55:15   I think bd gets 50 cents every time he posts that number I can't believe hes not on this By now [Reply]  [No Email]
buickanddeere 10-28-2012 08:13:11 184.151.61.177 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to 4020-101, 10-27-2012 17:03:58   Haven't been around the home computer, my desk and library. Couldn't recall off the top of my head the SM number. Technical Publishing is rather adapt at finding the info you need with a few hints. [Reply]  [No Email]
Tx Jim 10-27-2012 11:41:01 67.142.163.27 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to larryanderson, 10-26-2012 20:55:15   Quoting Removed, click Modern View to see Are you referring to the commission that he gets for posting that JD elusive 800 phone number?????????? :wink: :lol: AW Glen I'm just kidding [Reply]  [No Email]
M-MAN 10-27-2012 09:33:25 184.39.144.12 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to matthies, 10-26-2012 20:55:15   Glen must be busy. SM 2016 is the early version printed in 1957. SM 2050 was the later version and printed in 1962. Davenport has the reprints available for $11 each. Course that ain't gonna help Glen's kickback for retirement from Deere. lol [Reply]  [No Email]
matthies 10-28-2012 07:29:03 173.224.23.197 Report to Moderator	Re: BuickandDeere powersteering manual number in reply to M-MAN, 10-27-2012 09:33:25   Thanks [Reply]  [No Email]