Author	[Modern View]
djm 10-06-2012 11:47:42 174.45.205.65 Report to Moderator	I bought a non running 1948 Model G that had a hyd pump between the governor housing and the magnito. The hyd lines going from the pump to the rear were rotten and I have removed the pump and the lines. I started the tractor, but the rockshaft did not work. After reading several posts on this site I checked to see if the idler gear was present, it had been removed. I put another gear in and still have no rockshaft movement. From what little info I have found there may be an internal spacer blocking the port to the PTO pump. Does anyone have a service bulletin of the changes that were made when adding a live hyd pump? I would like to buy a copy of the bulletin or at least get the bulleting number and try to find one. [Reply]   [No Email]
Kent Petersen 10-06-2012 13:09:07 209.62.234.145 Report to Moderator	Re: G hyd in reply to djm, 10-06-2012 11:47:42   you dont need the bulletin just pull the power trol box off the back housing and remove the thin spacer from between the two gaskets put back on using one gaskey and you will be good to go [Reply]  [No Email]