|
| |
| John Deere Tractors Discussion Forum |
Topic: M JD Trans Oil
[Return to Forum]
| Author |
[Modern View]
|
| JohnDeereM50
09-13-2012 16:52:22
98.93.5.2
|
Is 80/90 gear oil ok in the M transmission? I want to drain out all the old and replace with new. Going to use hy-trans in Touch-o-matic if thats ok.
What weight of oil in the final drives? I use 85/140 in my WD45. Thanks for any help.
|
|
|
| M-MAN
09-14-2012 09:11:40
74.235.33.113
|
|
Re: M JD Trans Oil in reply to JohnDeereM50, 09-13-2012 16:52:22
|
|
| 140 wt would be quiter in your tranny and finals but the 85/140 oil you use in your WD will be just fine. Use non detergent motor oil in the TOM. I prefer 20wt or 30wt cause it works better and leaks less. It's also cheap.
|
|
|
| Hotflashjr
09-14-2012 05:32:42
71.192.122.39
|
|
Re: M JD Trans Oil in reply to JohnDeereM50, 09-13-2012 16:52:22
|
|
| Tractor Supply also sells straight 90 wt. by me. It's just Napa had a larger quantity at a cheaper cost.
|
|
|
| James Howell
09-14-2012 03:24:20
75.254.107.216
|
|
Re: M JD Trans Oil in reply to JohnDeereM50, 09-13-2012 16:52:22
|
|
| | We use SAE 90 in the transmission of "Sparky" our 51M. Takes about 61/2 quarts. We use SAE 10 in the Touch-O-Matic. Takes about 31/2 quarts. We use SAE 90 in the final drives. Takes about 31/2 pints. Hope this helps.
|
|
|
| Hotflashjr
09-14-2012 03:19:05
71.192.122.39
|
|
Re: M JD Trans Oil in reply to JohnDeereM50, 09-13-2012 16:52:22
|
|
| I found straight 90wt at Napa and that's what the manual calls for so that's what I used in the trans. I also used the 10wt in the TOM in case it leaks back into your engine of the pump deal goes bad. Personally I wouldnt want hy-trans leaking into my engine.
|
|
|
| JohnDeereM50
09-14-2012 04:56:20
98.93.36.153
|
|
Re: M JD Trans Oil in reply to Hotflashjr, 09-14-2012 03:19:05
|
|
| | I have never had a tractor before that could get hy-trans into the engine from a bad seal...good to know this about the M. Going to Napa is out of the question for me...they are always closed when I get off of work. I don"t know where else to get straight 90. Never used straight 90 in anything. The M is throwing me curve balls...lol.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
