Author	[Modern View]
neu-rich 09-12-2012 05:52:29 174.124.226.47 Report to Moderator	Trying To Put A New Gear Reduction Starter On My 3020 Diesel.. Tractor Had A 12v Starter But Tractor Was Orignally A 24v.. Anyways I Have It Wired Like The 12v Was And All I Get Is A Click Out Of The New Gear Red. Starter.. Any Ideas... I Have The Large Postive And A Small Wire On The Big Lug, Then A Small Wire To Sol. All Light And Buttons Work.. Thanks Jeff [Reply]   [No Email]
Brent in WI 09-12-2012 17:19:44 68.113.230.159 Report to Moderator	Re: 3020 Starter Replacement. in reply to neu-rich, 09-12-2012 05:52:29   I had the same problem when I converted my 3020 and ended up putting in a relay and problem solved. [Reply]  [No Email]
Tx Jim 09-12-2012 09:13:47 67.142.163.25 Report to Moderator	Re: 3020 Starter Replacement. in reply to strikefalcon, 09-12-2012 05:52:29   You could also entertain the idea of adding the relay kit that late model 4020 had from the factory. parts key #8 RE170320 KIT, STARTER CIRCUIT RELAY ADD 28.37 USD parts key #10 RE44536 STARTER MOTOR KIT, STARTERCIRCUIT ADD 122.19 USD This post was edited by Tx Jim at 09:19:16 09/12/12. [Reply]  [No Email]
neu-rich 09-12-2012 06:59:58 174.124.226.47 Report to Moderator	Re: 3020 Starter Replacement. in reply to neu-rich, 09-12-2012 05:52:29   No, Batterys Both Are 6 Months Old.. I Will Check That... [Reply]  [No Email]
Tx Jim 09-12-2012 06:29:16 67.142.163.23 Report to Moderator	Re: 3020 Starter Replacement. in reply to Mark Poss, 09-12-2012 05:52:29   Have you checked voltage especially when trying to start engine?? [Reply]  [No Email]