|
| |
| John Deere Tractors Discussion Forum |
Topic: M steering is backwards!!
[Return to Forum]
| Author |
[Modern View]
|
| EGBinOR
08-27-2012 17:35:28
184.100.133.61
|
What did I do? I"ve competly gone thru everything on a JD M and am putting it back together. Been at this off and on for three years. One of the things I"ve done along the way was to replace the seal in the stering gear and the bearings in the spindles etc.. Now I"m putting everything back together and getting ready for the last coat of paint only to discover the steering is now backwards!! For the life of me I don"t see what is wrong! Ashamed to say I"m a retired hvy duty truck mech!! Reminds me of the time I took apart and lubed the steering gear on my boat. That time I figured out what I did eventually! Can somebody help out an old man please... Thanks in advance for any help.. EGBinOR |
|
[Reply] [No Email] | |
| M-MAN
08-27-2012 21:33:10
184.39.61.57
|
|
Re: M steering is backwards!! in reply to EGBinOR, 08-27-2012 17:35:28
|
| Nothing to it. You have the spindles and knee's on the wrong side. Switch them & the steering arms will point forward & it will steer correctly. |
[Reply] [No Email] | |
| EGBinOR
08-28-2012 12:39:04
174.25.181.101
|
|
Re: M steering is backwards!! in reply to M-MAN, 08-27-2012 21:33:10
|
| Thanks for the help! Looks like I"m going to have to turn the whole axle 180 degrees. The parts book shows the axle off center fwd, apparently the pic is wrong. Maint manual pics show it "for and aft" both. |
[Reply] [No Email] | |
| Jaybird123
08-27-2012 20:57:34
207.199.226.9
|
|
Re: M steering is backwards!! in reply to EGBinOR, 08-27-2012 17:35:28
|
| Might be the steering arm is reversed on the lower end of steering shaft (it may be backwards). |
[Reply] [No Email] | |
| bill mart
08-27-2012 18:34:43
69.204.65.189
|
|
Re: M steering is backwards!! in reply to EGBinOR, 08-27-2012 17:35:28
|
| dont see how anything can be reversed up top,how about the steering arms at the botttom of the pedestal being reversed? bill |
[Reply] [No Email] | |
| Gene Davis (Ga.)
08-27-2012 18:31:31
98.80.244.71
|
|
Re: M steering is backwards!! in reply to EGBinOR, 08-27-2012 17:35:28
|
| See if you have the steering am rods on backwards where the tie rod ends' If so you now have the steering action reversed. |
[Reply] [No Email] | |
| DEEREMEYER1
08-27-2012 18:08:06
71.50.25.139
|
|
Re: M steering is backwards!! in reply to EGBinOR, 08-27-2012 17:35:28
|
| Is it possible you just have some lines reversed? I know nothing about the "M" steering system, but that could be the culprit. |
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|