|
| |
| John Deere Tractors Discussion Forum |
Topic: 1969 4020 hyd lever float postion
[Return to Forum]
| Author |
[Modern View]
|
| joe-illinois
08-24-2012 15:19:35
12.23.120.1
|
I need to put one of my levers into the float postion so my batwing wings will float, on my 4320 I put the rod going back to the hyd blocks into a different hole on the lever on the block but on the 1969 4020 there is only one hole on the lever on the hyd block that the rod goes into, thanks joe
|
|
|
| Bob Bancroft
08-24-2012 18:12:16
97.73.64.142
|
|
Re: 1969 4020 hyd lever float postion in reply to joe-illinois, 08-24-2012 15:19:35
|
|
| On my 2520, if I recall correctly, I take off the tool box, and there is another hole in the arm. Seems like you can only do that with the left SCV? It's in the op. manual.
|
|
|
| 4020deereboy
08-24-2012 17:18:01
174.255.147.209
|
|
Re: 1969 4020 hyd lever float postion in reply to joe-illinois, 08-24-2012 15:19:35
|
|
| I think you change the rod position on the lever itself under the dash for float position.
|
|
|
| joe-illinois
08-24-2012 18:05:14
12.23.120.1
|
|
Re: 1969 4020 hyd lever float postion in reply to 4020deereboy, 08-24-2012 17:18:01
|
|
| It's a side counsel, are there different holes in that lever or do you have to adjust the length of the rod, thanks joe
|
|
|
| M w J
08-24-2012 18:32:31
66.6.1.21
|
|
Re: 1969 4020 hyd lever float postion in reply to joe-illinois, 08-24-2012 18:05:14
|
|
| That rod has to be put in the other hole on the front side the tin around the seat has to come off
|
|
|
| M w J
08-24-2012 18:32:13
66.6.1.21
|
|
Re: 1969 4020 hyd lever float postion in reply to joe-illinois, 08-24-2012 18:05:14
|
|
| That rod has to be put in the other hole on the front side the tin around the seat has to come off
|
|
|
| joe-illinois
08-24-2012 19:29:17
12.23.120.1
|
|
Re: 1969 4020 hyd lever float postion in reply to M w J, 08-24-2012 18:32:13
|
|
| Thanks MwJ, just found it in the parts CD I have, looks like you can only do it to the left one like Bob said, thanks again joe
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
