Author	[Modern View]
ih555 08-13-2012 18:45:16 76.77.196.22 Report to Moderator	I"m looking for rear wheel weights for my 4020. I"ve noticed that there are different part numbers for them. What part number would I need for this 4020 and what is the difference? Is it the weight? [Reply]   [No Email]
Randy G 08-14-2012 22:35:46 71.7.62.188 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to ih555, 08-13-2012 18:45:16   I have a 4020 coming with 2 sets of rear weights on it. E me with questions. I"m in SE iowa [Reply]  [No Email]
Shaun Wallace 08-14-2012 18:41:44 184.79.84.3 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to ih555, 08-13-2012 18:45:16   I have 10 BW701 in west texas that are for sale. Took of 4020 or 2 cyl 630 or both years ago. [Reply]  [No Email]
Tx Jim 08-14-2012 05:23:27 67.142.163.22 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to buickanddeere, 08-13-2012 18:45:16   Quoting Removed, click Modern View to see Larry Although I've installed/removed 100's of the R3404 weights that number wouldn't surface in my head. You're correct. The aftermarket weights from B&W and Taylor foundries weren't as smooth and nice as JD foundry weights but the JD dealer I worked sold a lot of aftermarket weights because they weighed the same and cost a lot less $$$$. [Reply]  [No Email]
Bob Bancroft 08-14-2012 05:04:36 97.73.64.152 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to ih555, 08-13-2012 18:45:16   I have a pair for sale here in central NY. I'd have to look at them to find the casting number. They are what I believe are called "Z" weights? I think that some later weights, that look identical, actually have a larger center hole. [Reply]  [No Email]
Tx Jim 08-14-2012 04:50:29 67.142.163.22 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to Ralph Bauer, 08-13-2012 18:45:16   T21689 WEIGHT is listed in 4020 parts cat. for 34" & 38" rear wheels. Also listed are these. R61524 WEIGHT 2 64KG (140 LBS) (34" AND 38" WHEELS) R61727 WEIGHT 2 54KG (120 LBS)(FI) (30" WHEELS) This post was edited by Tx Jim at 04:50:58 08/14/12. [Reply]  [No Email]
larryanderson 08-14-2012 05:14:47 99.196.64.57 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to Tx Jim, 08-14-2012 04:50:29   I have had a lot of wheel weights and the most common have R3404 cast stamped on them.There are weights with round holes,oblong holes,Zweights [for adjustment] and larger center Z weights that fit over 9 bolt hub ,all weighing 140#.Weights from the number series all the way to 4455 will all fit, just nice if they are all the same.I dont know part#s.There are also some 100# weights that look like they should be on letter series that have been on a few.Many different ones that fit but the right ones to me are R3404 Z weight w/9/1/4 center.They usually bring around $100 a piece at sales.There are also some after market ones that have B+W stamped on them but I try not to buy them. [Reply]  [No Email]
Fixerupper 08-14-2012 10:10:16 100.42.82.164 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to larryanderson, 08-14-2012 05:14:47   Larry, what is your location? Jim [Reply]  [No Email]
Mark-Ia 08-14-2012 11:16:09 67.55.246.28 Report to Moderator	Re: 4020 Rear Wheel Weights in reply to Fixerupper, 08-14-2012 10:10:16   Clarion Iowa [Reply]  [No Email]