Author	[Modern View]
Buster 07-21-2012 18:33:45 75.121.226.49 Report to Moderator	Check out this photo, it looks like Farmall F-20 front wheels to me? Do they fit a A JD? [Reply]   [No Email]
jd40an 07-22-2012 19:53:52 208.126.157.188 Report to Moderator	Re: Front wheels in reply to Buster, 07-21-2012 18:33:45   Yeah, they are F&H wheels. There were several types. I have a set of one of the more common style on an Unstyled "A" I think the long clutch handle was meant to be installed when a corn picker was used, as you had to stand to see with the picker mounted. Surprisingly, I had a '51 "G" with the long handle (was there when I bought it) & you are not supposed to be able to put a "227" on a "G"--We did it anyway, was really "tight" by the clutch pulley & needed to be mounted a little "off center", but worked OK, except needed a "live"PTO, (which we fixed by buying a "60" for the next years crop). [Reply]  [No Email]
34gpa 07-22-2012 10:22:18 173.190.183.89 Report to Moderator	Re: Front wheels in reply to Buster, 07-21-2012 18:33:45   They are F&H wheels made for a John Deere A.I have 2 sets of them,one on a G. I also have 2 sets of them for a B JD. They are 15 in. The ones for Intl. look a little different,I have a set that I bought just to have some extra clips. More rare than round spokes.But I admit the hub looks a little different [Reply]  [No Email]
34gpa 07-22-2012 10:20:38 173.190.183.89 Report to Moderator	Re: Front wheels in reply to Buster, 07-21-2012 18:33:45   They are F&H wheels made for a John Deere A.I have 2 sets of them,one on a G. I also have 2 sets of them for a B JD. They are 15 in. The ones for Intl. look a little different,I have a set that I bought just to have some extra clips. More rare than round spokes. [Reply]  [No Email]
Tx Jim 07-22-2012 04:15:11 67.142.163.26 Report to Moderator	Re: Front wheels in reply to Wilamayb, 07-21-2012 18:33:45   Photo could be better but the wheels might be the optional F&H adjustable wheels that came on some JD's. The F&H wheels mentioned had different width settings similar to rear wheels to cast centers. [Reply]  [No Email]
CLW 07-21-2012 20:34:11 108.206.122.51 Report to Moderator	Re: Front wheels in reply to Tim S, 07-21-2012 18:33:45   Don't know about the wheels but I have never seen a clutch handle that tall before on any Deere. [Reply]  [No Email]
Carlyle Hoffman 07-22-2012 04:14:31 74.71.111.250 Report to Moderator	Re: Front wheels in reply to CLW, 07-21-2012 20:34:11   The CLUTCH handle, yes i have one bought it off a fellow in MI, years ago. It is orig, as to its intended purpose i have no idea. I use it on my 37 (A). [Reply]  [No Email]