Done with one finish mower guessI'll start on another one

old

Well-known Member
So I have the Woods RM550 done and working well. I have another finish mower that I own and is hanging on the wall of my machine shed. If I try to use it as is the belt jumps off due to the center spindle being loose due to bad bearings I think. Problem maybe that I do not know what brand it is and have not found any tags or markings other then a Ford emblem that the P.O. stuck on it. So no it is not a Ford finish mower. Figure since I could find bearing locally for the Woods I should be able to do the same on this one
 
Rich you have been at things for so long you just can't quit.Projects keep our mind and body going.How is the garden this year with small amounts of rain.I faith you can find the right parts needed to make her go.Best of luck Scott
 
Due to drought condition my garden is slowly dying. Tomato's are still holding on but that is about it. Green beans are doing ok. Okra is dying out. All but one squash plan has died.

As for project this next finish mower has been hanging on the wall of the machine shed for a few years. Figure since I just rebuilt one I might as well do this one I have had around for years and either sell it or use it
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top