So now that I have the right seals for at least 3 of the seals I need. 3 more will be in tomorrow I have one spindle done. Took another spindle off and tried to press the shaft out but that was a no go till I heated up the spacing bushing so now waiting for things to cool so I can take it the rest of the way apart. I also had to free up the belt tension pulley shaft so it would move freely. I also have new belt for it since the old belt had a place that was cut more then half way. If all goes right I should have this done some time tomorrow. I had to take the whole gear box off so I could free up the PTO shaft but that made it easy to work on the other things