Kverneland Taarup -9300 parts

blackelk

Member
I just bought this rake,it looks really new but makes noise. Old guy I bought it from said it needed a bearing. I dropped the basket to replace the bearings and the bevel gear is worn out. Tried ordering one but seems no one can get it. the rake is only 4 years old and no longer supported by the local dealer that sold it. They tell me Kubota took them over but when I talk to Kubota they claim they can't get parts before the take over. I have heard all the hay bobs are generic and parts are interchangable. I think maybe the tines and springs might be interchangable but doubt of shafts, bevel gears and pinions would be the same. Does anyone have any information or advice?[/img]
 
Well I looked up just Kverneland 9300 an found a Kamp web part with a parts diagram. I guess that Item # 11 is what your talking about needing. The part number is VGTH00137. I found it listed for sale at several different online places. Listed for around $450.


Kverneland 9300 parts diagram: https://www.kramp.com/shop-nl/en/906384/1853155/0/02+Main+Frame+suitable+for+Kverneland+9300+Series+67TH01
a273792.jpg

Kverneland 9300 parts diagram
 
Yes, I tried ordering the ones you found but they told me they couldn't get it even though it showed available on the web site. Kramps is overseas and when i tried to contact them they told me they have no dealers in my area. I finally found a dealer in Yakima who was able to purchase if for me from an oversea vendor. Thanks for the help.
 
Welcome to the joys of foreign made machinery I?ve gotta lely power harrow well lely sold the tillage division to tulip 🌷 and neither one wants to claim the thing I finally got lucky and bought a parts machine because I needed new teeth for it and there was none to be had anywhere . If something major goes out I hope between the two I can make one
 
I've got an old (made in 1998) Kverneland TA 711 belt rake and the parts are totally unavailable here. When the rake was working, it did a
fantastic job, but I managed to break 8 bushings. Unless I can find another one for parts, it might become scrap. I do have an idea how to
make the parts I need as the bushings are plastic.
My suggestion is look for a parts machine because I doubt you'll ever find new parts, (and if you do find them they may be way too expensive)
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top