Hey there. I have a "new to me" discbine 408. Had a chance to use it for the first time today. I notice that it vibrated quite a bit in the corners.
Read the manual again and realized that i forgot the extra drawbar piece that extends the shaft to hitch length to 22". i put that on, an it worked much better. However, theres still a vibration on tight corners.....normal?
One thing i noticed is that the shaft phase is not quite exactly in phase. It's like a degree or 5 out...(noticable by eye). Is that something that NH did on purpose? Or is it more likely that shaft has been apart and re-welded? It looks original.
Thanks.
Read the manual again and realized that i forgot the extra drawbar piece that extends the shaft to hitch length to 22". i put that on, an it worked much better. However, theres still a vibration on tight corners.....normal?
One thing i noticed is that the shaft phase is not quite exactly in phase. It's like a degree or 5 out...(noticable by eye). Is that something that NH did on purpose? Or is it more likely that shaft has been apart and re-welded? It looks original.
Thanks.