PTO Impement-belt driven tool

boater901

Member
Trying to identify a Implement for front or rear pto- lt green color ;looks to be belt driven- maybe a buzz saw- 2 serial numbers- they are PK1204-H and PK 1751-H - I hope the pic goes through
mvphoto11494.jpg
 
That is off an old JD 45/55/95 combine. On the rear of the engine. the flat belt runs the separator. the large V belt is for propulsion/transmission.Not a "tractor" part at all.
 
It's the "engine powershaft" from an old John Deere combine.

Bolts to the face of the engine flywheel housing, and the splineshaft at the other end mates with a dummy clutchplate/drive disc.

Here's a drawing for a "55"... the 1204 number matches. You either misread the 1751 number, or that's a slightly different version.

<img src = "http://oi67.tinypic.com/20uz7u8.jpg">
 
(quoted from post at 11:56:34 02/25/18) It's the "engine powershaft" from an old John Deere combine.

Bolts to the face of the engine flywheel housing, and the splineshaft at the other end mates with a dummy clutchplate/drive disc.

Here's a drawing for a "55"... the 1204 number matches. You either misread the 1751 number, or that's a slightly different version.

&lt;img src = "http://oi67.tinypic.com/20uz7u8.jpg"&gt;
hank u all for responses- anyone with a use can have it ,
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top