(800) 853-2651
SHOP NOW

Westgo cultivators

R

Russell092581

New User
I recently purchased a set of WESTGO 2220 Cultivators 6-row 30in. I cannot seem to find a dealer, or a manufacturer online anywhere. Can someone give some info on this brand, if you can still find parts, etc...
Thanks :?:
 
Never heard of that brand. It might help others help you if you tell us if you are in the USA, Canada or someplace else as things vary with country. Also if in states what state or Canada what privince?
 
(quoted from post at 07:07:49 12/27/17) Never heard of that brand. It might help others help you if you tell us if you are in the USA, Canada or someplace else as things vary with country. Also if in states what state or Canada what privince?
Click to expand...

I am in the USA. Southern Indiana
 
what do you need? Often MFGers use 'generic' parts/componets.Shoup has a good selection of parts for many brands.Maybe you can find something with them.
 

It has rolling guard or Shields, which ever you want to call them. I have one that is bent. I know as far as shovels, I can find this most places, it is Danish Tine. It's those wheels, and maybe the gauge wheels, that is hard to find, specific for this cultivator. I checked with IH, and Deere, and they are about $100/piece for them, but they are not as identical, as the original. Just trying to find OE for it, may be like finding needle in hay stack. :roll:
 
Shoup will have tines and the shields.If you don't have a Shoup catalog,call them,they will gladly send you one for free.Good people,I buy lot of parts from them.Why cant you straighten the bent shield?That cultivator(as is my White) will be made with mostly vendor parts.Very little will be made 'in house'. Sloan is another source for parts.
 

WESTGO was a farm equipment manufacturer in West Fargo, ND from about 1939 though 1985.
 
The cultivator business dried up, since Round up came about, but watch the sale bills in you're area the short line used a lot of the same parts, but not John and IHC .
 
You must log in or register to reply here.

Similar threads

A
Bush hog 2510 rotary mower blades???
Replies
2
Views
211
J.Wondergem
J.Wondergem
G
1944 Case SC Magneto
Replies
8
Views
303
r.w.b.
R
MNSawmill
Need help finding Sherman Forklift cylinder seals on Ford 801
Replies
3
Views
180
Tim PloughNman Daley RIP
T
R
ISO Gaurd
Replies
1
Views
245
db4600
db4600
T
Cannot find Info on JD Drill
Replies
18
Views
1K
Tlgavin05
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top