HillsideFarm1932
New User
Restoring a 1928-29 three bar John Deere Dain
Side Delivery Hay Rake that belonged to my
grandpa and am in need of a few "smalls" in the
parts department.
This is the one that had wood clamped to the
tinebars and the tine holding ends went through the wood.
Pretty sure all the pre1930 JD Dain units were like
this.
I need some of the cast clamps that held the wood
in place on the tinebar(both the top ones and the
ones on bottom that went between the tinebar and
wood)
I also need some tines.
Need at least 6 of each but will purchase more if
priced fairly since I'd like some spares. I plan to use
it when finished but only on 2 acres of timothy hay.
I also need all 3 lever latch adjusting handles mine are missing.
Has been out of service for about 60 years!
Send pics if possible along with price and quantity available to my email below. Thank You! Kevin
Email: [email protected]
Side Delivery Hay Rake that belonged to my
grandpa and am in need of a few "smalls" in the
parts department.
This is the one that had wood clamped to the
tinebars and the tine holding ends went through the wood.
Pretty sure all the pre1930 JD Dain units were like
this.
I need some of the cast clamps that held the wood
in place on the tinebar(both the top ones and the
ones on bottom that went between the tinebar and
wood)
I also need some tines.
Need at least 6 of each but will purchase more if
priced fairly since I'd like some spares. I plan to use
it when finished but only on 2 acres of timothy hay.
I also need all 3 lever latch adjusting handles mine are missing.
Has been out of service for about 60 years!
Send pics if possible along with price and quantity available to my email below. Thank You! Kevin
Email: [email protected]