SteveHarjula
New User
Hello Everyone,
I have a 5' Fehrenbach flail with hammers that I use to mow down junipers. Well I was out in a thick patch and didn't see a large rock hiding in the plants. I hit it pretty hard and broke apart the bearing housing.
The weird thing is that I didn't see any bearing parts around the shaft.
I haven't been able to find any information on this flail. Does anyone have an idea where I could buy parts, or have an idea if I could get a new bearing housing machined? Or is that more trouble than it's worth?
Thanks for your help,
Steve
Here is the flail:
https://imgur.com/a/fco4n
The broken non-drive side
https://imgur.com/a/9zyk3
The broken bits of the bearing housing
https://imgur.com/a/4tCfb
The good drive side with intaked bearing housing
https://imgur.com/a/Vhkvs
I have a 5' Fehrenbach flail with hammers that I use to mow down junipers. Well I was out in a thick patch and didn't see a large rock hiding in the plants. I hit it pretty hard and broke apart the bearing housing.
The weird thing is that I didn't see any bearing parts around the shaft.
I haven't been able to find any information on this flail. Does anyone have an idea where I could buy parts, or have an idea if I could get a new bearing housing machined? Or is that more trouble than it's worth?
Thanks for your help,
Steve
Here is the flail:
https://imgur.com/a/fco4n
The broken non-drive side
https://imgur.com/a/9zyk3
The broken bits of the bearing housing
https://imgur.com/a/4tCfb
The good drive side with intaked bearing housing
https://imgur.com/a/Vhkvs