I recently had a problem with the left knotter on my 24T. A couple of times it wouldn't tie and I end up with three strands of twine coming out of the knotter, trailing back over the bales in the chamber. I normally can pull on the two that aren't around a bale and get them out of the knotter, but of course I have a bale or two with no twine around the left side. I am thinking that the twine knife might be dull and not cutting right. I'm using 7000 sisal, and have not had this issue in the last several years I've used the baler.
Any other thoughts? (Hopefully my description makes sense).
Any other thoughts? (Hopefully my description makes sense).