I was attempting to adjust my needle to plungerhead as shown in my manual. I didn't realize it but one needle was a little higher than the other, and it went past the point it should for the measurement, so I had to keep going with the flywheel. I could not complete the cycle, the baler didn't want to go past a certain point. I looked and it seems like the needles are hung up on the twine discs. I have been staring at it for awhile and nothing easy is coming to me as to how to get those needles back in the home position. The knotters are in the middle of making knots, so I don't know if that is the problem.
Any help is appreciated.
Any help is appreciated.