6' Ford Tractor snowplow

I have a Ford tractor snowplow but no undercarriage to hook to the tractor. Does anyone have any idea what they would be worth in decent condition? needs some paint. Thank you.
124.jpg
[/img]
 
Your blade came off of a Hundred Series
Ford.
If/when you advertise it it might help to
mention that the same blade will fit the
older N Series Dearborn frames all the way
up to the Ford Thousand Series tractors
into the 1970s. The frames changed over
the years to fit newer models but the
blades stayed the same.
Another selling point is that one is the
true snow Plow which was taller and had
the trip springs. Ford also sold a dozer
blade which fit on that same frame that
was lower and was fixed. It did not have
the springs, etc. Here you could get $150-
$200 for it pretty easily as the other
half of the frame would be simple to make
if you are good with a torch and welder.
I have that blade and correct frame for my
3000.
 
(quoted from post at 09:33:21 07/02/17) Your blade came off of a Hundred Series
Ford.
If/when you advertise it it might help to
mention that the same blade will fit the
older N Series Dearborn frames all the way
up to the Ford Thousand Series tractors
into the 1970s. The frames changed over
the years to fit newer models but the
blades stayed the same.
Another selling point is that one is the
true snow Plow which was taller and had
the trip springs. Ford also sold a dozer
blade which fit on that same frame that
was lower and was fixed. It did not have
the springs, etc. Here you could get $150-
$200 for it pretty easily as the other
half of the frame would be simple to make
if you are good with a torch and welder.
I have that blade and correct frame for my
3000.
Thank you for taking the time to give me all that information. And thank you to everyone else who responded.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top