Old Clark Y20 forklift / yardlift

parrothead · Jun 29, 2017

This message is a reply to an archived post by parrothead on February 14, 2017 at 22:00:10.
The original subject was "Old Clark Y20 forklift yardlift".

Ok, so I actually drove the old Clark out of the shop under its own power for the first time last night! 3 new tires, new wheel cylinders, master cylinder and a carb swap and she was good to go. It is missing the floor plated and gas pedal (see picture), so I'll have to fab up something. It is also missing the gas tank, so I'll mount a little mower tank and battery on the engine cover. It'll be ugly, but I think it'll work. The original battery is in the rear and you have to remove the big weight on the back to get to it. I really need this little machine to lift my new compressor up to the loft in my new shop building. Hope it can handle it!

showcrop · Jun 30, 2017

Good for you! I can't imagine being without my old '69 Yale.

fgclark · Feb 2, 2024

In need of a drive wheel for my 1955 Clark Y20 yardlift, it has pneumatic tires. I think the part # is 103383 or 103384 or 103386

Jim.ME · Feb 2, 2024

fgclark said:
In need of a drive wheel for my 1955 Clark Y20 yardlift, it has pneumatic tires. I think the part # is 103383 or 103384 or 103386

Welcome to the Forums.

You will be best served by starting a new thread here of your own, about your issue. You tagged onto an old thread. It is almost 7 years old. The person that started the thread hasn't posted here for almost 4 years. Some people, who might have info to help you, see the date of the original thread and or brand then just pass it by. There are many knowledgeable members here with knowledge to help. Give the info on your machine and needs. The back story sometimes helps, it is better to give more info than you think might be needed, no charge for extra words.
In this case pictures of the wheel you are looking for may help. Dimensions, tire size, etc. may help. Your general location in this wide world and where you have already checked would be good info to add. I have to believe the part number isn't going to mean much to anyone here.

This site is more tractors and implements than forklifts. You might have better luck with this request if you post it on the Crawlers, Loaders, Dozers and Backhoes Forum this site has. Here is a link to it:

Crawlers, Loaders, Dozers and Backhoes Forum

fgclark · Feb 2, 2024

Jim.ME said:
Welcome to the Forums.

You will be best served by starting a new thread here of your own, about your issue. You tagged onto an old thread. It is almost 7 years old. The person that started the thread hasn't posted here for almost 4 years. Some people, who might have info to help you, see the date of the original thread and or brand then just pass it by. There are many knowledgeable members here with knowledge to help. Give the info on your machine and needs. The back story sometimes helps, it is better to give more info than you think might be needed, no charge for extra words.
In this case pictures of the wheel you are looking for may help. Dimensions, tire size, etc. may help. Your general location in this wide world and where you have already checked would be good info to add. I have to believe the part number isn't going to mean much to anyone here.

This site is more tractors and implements than forklifts. You might have better luck with this request if you post it on the Crawlers, Loaders, Dozers and Backhoes Forum this site has. Here is a link to it:

Crawlers, Loaders, Dozers and Backhoes Forum

Thanks very much

Old Clark Y20 forklift / yardlift

parrothead

Member

showcrop

Well-known Member

fgclark

New User

Jim.ME

Well-known Member

fgclark

New User

Similar threads