Eric_Smither
New User
I am working on this baler for my Dad and the linear actuator is needing replaced. The only identifying information on it is the label "Warner Electric" and "MCSD". I have tried to find a stamped part number or engraving but it must have been worn off from weathering.
The length of the actuator from the center of each hole end to end when not extended is about 16.5". The stroke length when extended on the baler is about 9 5/8".
I've been looking for replacement parts and this seems to be the closest match I can find:
http://www.warnerlinear.com/ecatalog?cid=b-track&id=K2VLG20-12V-BR-10
With the length of 16.32" and a stroke length of 10" I'm hoping it will fit. But I would like to know what someone here thinks before buying.
The length of the actuator from the center of each hole end to end when not extended is about 16.5". The stroke length when extended on the baler is about 9 5/8".
I've been looking for replacement parts and this seems to be the closest match I can find:
http://www.warnerlinear.com/ecatalog?cid=b-track&id=K2VLG20-12V-BR-10
With the length of 16.32" and a stroke length of 10" I'm hoping it will fit. But I would like to know what someone here thinks before buying.