old brush hog

jim degraffenreid · May 18, 2017

Looking for oil seal
MODEL A
WARNER
Auburn
Need both oil seals can anybody Help

MF#1 · May 18, 2017

Sorry, I can't help with the seals :-( But if it were mine I would fill it about 3/4 full with JD corn head grease or even grease gun grease and keep mowing. I've got a 6 and 7 footer that both get grease, have been for many years with no issues. Your mileage may vary.

Duner Wi · May 18, 2017

Don't know if this will help.
http://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=implment&th=49505

Usually seals have a part # on them that a good par tsor bearing house should be able to help.

C. Amick · May 19, 2017

Motion Industries is usually pretty helpful. If you can't find a number on the seals, take a dial caliper and measure the outside diameter of the seal and the shaft size. That's the what I had to do to find a new seal for my mower from Motion Industries.

jim degraffenreid · May 21, 2017

Thanks for all the leads, went to a bearing dealer, they fixed me up and added new like to old equipment.

old brush hog

jim degraffenreid

New User

MF#1

Member

Duner Wi

Well-known Member

C. Amick

Well-known Member

jim degraffenreid

New User

Similar threads