Just got a #350 7 foot sickle bar mower to mow pond banks and lane ditches.
Tractor to be used is a 2755. Have manuals for both the tractor and mower.
Seems like the tractor is too big for the mower. Example:
The mower book says to have the tractor drawbar between 14" and 17" off the ground.
The tractor drawbar is 20" and has no up and down adjustment.
The ends of the draft links do not lower enough to meet mower specs.
Although I'm not totally stumped, has anybody been down this road and have suggestions?
Thx
Tractor to be used is a 2755. Have manuals for both the tractor and mower.
Seems like the tractor is too big for the mower. Example:
The mower book says to have the tractor drawbar between 14" and 17" off the ground.
The tractor drawbar is 20" and has no up and down adjustment.
The ends of the draft links do not lower enough to meet mower specs.
Although I'm not totally stumped, has anybody been down this road and have suggestions?
Thx