Vicon CM2400 Gearbox Bearing(Disc Mower)

I have a CM240, which I think is similar (older). Is it a gearbox bearing or the bearing in the top of the cutter bar, that is under the gearbox? Is it tight in the housing or on a gear shaft? You may have to heat the area around the bearing to get it to go in.

Garry
 
#13 in photo. Have to put bearing on shat first and then place in gearbox.
48079.jpg
 
I would heat the housing around where the bearing goes with an oxy/acetylene torch. It would not hurt to freeze the bearing and shaft also, but you probably would not gain that much.

Garry
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top