Bush Hog Model 108

ADHDinYC

New User
This message is a reply to an archived post by Joestreb on August 02, 2011 at 21:31:39.
The original subject was "Bush hog model108".

Lest anyone think Joestreb is crazy, I also have a Bush Hog Model 108 10' offset rotary cutter. I have been unable to locate ANY information on this model whatsoever. I'm posting a photo of the placard showing the Model and Serial Numbers. If anyone can tell me anything about the Bush Hog Model 108 offset rotary cutter, especially where to find a parts diagram, I would greatly appreciate it.
ad0c0491-f959-4988-a2a2-a159d808a4be.jpg
 
I contacted Bush Hog, Inc. directly via the company's Facebook account (using Facebook Messenger) and I actually got a response. After some back-and-forth discussion of whether my rotary cutter could actually be a Model 3108 (which it's not), I sent the rep more photos and was able to confirm that it is a VERY OLD Model 108. So they do exist! Joestreb, if you're still out there, we're not crazy. Bush Hog sent me what they referred to as the only parts diagram they have for the Model 108. In case anyone else out there is looking for parts for the Bush Hog Model 108 rotary cutter (chopper/mower), I have attached the parts diagram they sent me. I'm also including a link to their Facebook page, since they appear to be pretty responsive. Happy hunting!
a156623.jpg

Bush Hogs Facebook Page
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top