(800) 853-2651
SHOP NOW

Allis corn planter

D

D&C Farm

Member
Have a Allis no till planter with 60 series units and John Deere plates and adapters what gear combinations will plant @ 24000 population have 14 teeth gear driving 10 teeth gear now any help appreciated
 
Depends on three things: size of unit drive (press wheel) tire, row spacing and if you are using 16 or 24 cell plates. If you are using 7"x18" tire (most common) 14 tooth drive and 10 tooth driven will give you a population of 17400 using 16 cell plates and 26100 with 24 cell plates on 30" row spacing. To get closer to 24000 you would need an 11 tooth driven sprocket (approx. 23800).
 
Also if you have the 5 1/2" wide center rib tire, they plant about 10% more so you would need to use a 12 tooth driven sprocket to get close to 24000.
 
Got the info from an AC manual on the 600 series frame that came with a planter I bought for parts and from the manual that came with the 70 series units on the No-Till planter I bought in the late 70's. Still using some of the 72 units between the Air-Champ units on my narrow row bean planter.
 
You must log in or register to reply here.

Similar threads

C
Looking for 4 TP827 plates for Covington TP66 Speed Duplex planter
Replies
1
Views
84
Fritz Maurer
F
N
No till size for MF-150 3 point
Replies
7
Views
303
Leroy
L
C
Old IH 249 corn planter
Replies
5
Views
566
Mark Poss
M
K
John Deere M 1 row planter
Replies
2
Views
292
Kinseya
K
F
John Deere 71 popcorn seed plate
Replies
4
Views
414
paul
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top