woods RM 306

Kirk-NJ · Apr 5, 2013

Anybody need parts for a woods RM 306. This is the six foot model. A friend of mine gave it to me to scrap. He said he didn't like it cause it kept breaking belts. He kept the shaft and I took of the three point hook but the deck is not rotten spindles are there but I hate to scrap it if someone can use it.
Email is open.

Kirk

JD Seller · Apr 5, 2013

I bet that he was breaking belts by mowing too tall grass. They are a finish mower not a bush hog. They where made for smaller HP tractors too. Put them on a 50 HP tractor and they would snap the belts when you pushed them too hard.

I wish you where not in NJ. I would like the pulley drive system but you are too far away from Iowa.

Anonymous-0 · May 13, 2013

I need a blade holder, special bolt, washers etc, and a blade. Do you still have it?

aandreasswe@gmail.com · Nov 20, 2016

(quoted from post at 03:28:41 04/05/13) Anybody need parts for a woods RM 306. This is the six foot model. A friend of mine gave it to me to scrap. He said he didn't like it cause it kept breaking belts. He kept the shaft and I took of the three point hook but the deck is not rotten spindles are there but I hate to scrap it if someone can use it.
Email is open.

Kirk

I need a main spindle, if you still have it. But this post is 3 1/2 years old, so I suspect it is long gone. Thanks Al

woods RM 306

Kirk-NJ

Well-known Member

JD Seller

Well-known Member

Anonymous-0

Well-known Member

[email protected]

New User

Similar threads