PTO shaft guard for JD 350 mower

The metal PTO shaft guard on my JD 350 sickle bar mower is dinged enough that it binds as the shaft moves in and out. Can I replace the metal guard tubes with plastic ones? If so, how?
 
Figure out what series PTO shaft it is (6, 12, 14, etc. ) then you can get a replacement shield (order the "bearings" separately) from an A&I or TISCO dealer. if I have time later, I'll do some digging in JD parts and see what I can find out.
 
(quoted from post at 23:19:15 11/14/16) Thanks. I looked at the JD Parts site, but could not determine the series of the shaft. Maybe you know what to look for.

After signing in with a JD dealer one can right click on part number that has been placed in ones shopping cart and if specification are listed the spec's will appear as shown below. The A&I part number will also be shown.

42582.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top