I've found a Ford 101 moldboard. I it has good bottoms, but is missing coulters. Needs the whole assembly. It has land side but no tail wheel. I've only seen pictures. Do 101 come with only 14 inch bottom, I would like a 2x12. Think my to30 Ferguson could handle the 2x12 or one 16 ok. Don't know how well it could with two 14's. The sells man says I could remove one.
I'm seeing some Dearborn online with two bottom and a tail wheel. Can someone point me to things I need to check before buying. I've seen coulters priced at about 150.00 so two would be about 300.00 for two. Haven't looked for a tail wheel or parts for bottoms.
I also found a single 16 listed as a white. No coulter or tail in the picture.
I'm seeing some Dearborn online with two bottom and a tail wheel. Can someone point me to things I need to check before buying. I've seen coulters priced at about 150.00 so two would be about 300.00 for two. Haven't looked for a tail wheel or parts for bottoms.
I also found a single 16 listed as a white. No coulter or tail in the picture.