Hey there to all!
so im rebuilding my 750 grain drill and for the life of me I cant get the fertilizer shaft to spin. Ive jacked up the right rear meter wheel of the ground. Ive lowerd the row units. Theres a gear box at the back right side of the behind the grain/fertilizer ben. well you can push a knob in to engage all this and turn a locking ring to lock the knob in. on this box is two levers that slide left out of this gear box or in to this gear box. I spin the meter wheel which turns the seed box shaft but the fertilizer shaft never engages. Theres two gears on the shaft that goes to this gear box at the back right of the drill. the shaft closes to the gear box spins but is apart of a piece that slides over the shaft that should spin the gear that spins the fertilizer shaft. Gonna pull the remainder of my hair out on this one!!!! any help would be great .. THanks
so im rebuilding my 750 grain drill and for the life of me I cant get the fertilizer shaft to spin. Ive jacked up the right rear meter wheel of the ground. Ive lowerd the row units. Theres a gear box at the back right side of the behind the grain/fertilizer ben. well you can push a knob in to engage all this and turn a locking ring to lock the knob in. on this box is two levers that slide left out of this gear box or in to this gear box. I spin the meter wheel which turns the seed box shaft but the fertilizer shaft never engages. Theres two gears on the shaft that goes to this gear box at the back right of the drill. the shaft closes to the gear box spins but is apart of a piece that slides over the shaft that should spin the gear that spins the fertilizer shaft. Gonna pull the remainder of my hair out on this one!!!! any help would be great .. THanks
