New Holland 65 compact baler

I got the last new set about 4 yrs. ago. They were the last known set to exist. My dealer found them in Canada somewhere. Your only hope now is to find a parts baler somewhere. What happened that yours
cannot be fixed? I got a piece of old board stuck in mine first time out this year and it glanced one of my "new" needles to side and broke it. But I had all the pieces and brazed it back together. Baled
thousands of bales since and no problems. Did you break them both? If not take good one off and trace it on table. Shim and clamp broken one on trace and braze it up. There is quite a bit of adjustment
when remounting so you do not have to fix 100% accurate. Make sure you know what broke it and correct that problem before you start in again.
 
(quoted from post at 11:31:02 09/08/16) I have a pair here in Eastern Ontario that can be very reasonably had

And that my friends demonstrates the beauty of the internet! Ain't supposed to be any left and yet here's a guy that wants to get rid of a set! Gotta love it! :D
 
(quoted from post at 12:31:02 09/08/16) I have a pair here in Eastern Ontario that can be very reasonably had
Just got it going again on Thursday. Ran some hay in the barn through it and it tied some good knots.Want to field test it this coming week. Welded up needles look good but this is about 2nd or 3rd time they have been welded. That's why I'd like to have spares. Definitely interested in those in Ontario.
 
I'll have a look and see if I can find them. I took them off to compare to the needles on a 269 but they're different. Stay tuned.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top