This message is a reply to an archived post by MF Poor on April 08, 2010 at 17:13:04.
The original subject was "Rebuilt MF 66".
My Massey 66 does not "reset" fully, meaning the pin, with the two giant washers on either side does not go all the way down every time on the middle bottom. Do you have any insight as to what might be causing that, having rebuilt one and all? The effect I am having is that the plow trips too easy, even when I just lower it into the ground to start plowing bam, it trips. Thank you and your plow looks awesome!
The original subject was "Rebuilt MF 66".
My Massey 66 does not "reset" fully, meaning the pin, with the two giant washers on either side does not go all the way down every time on the middle bottom. Do you have any insight as to what might be causing that, having rebuilt one and all? The effect I am having is that the plow trips too easy, even when I just lower it into the ground to start plowing bam, it trips. Thank you and your plow looks awesome!
