WAYNE-N-TX
Member
I have a JD 467 baler (mega wide), got it second hand. This past Sunday I baled a few from a small place about 4/5 miles from here. Baled the last bale ( about a 4 footer) dumped it and drove the tractor & baler home. Open the doors to oil the chains, the long one that runs the top roller was gone. Got in my truck went back over the same road, nothing, I guess someone picked it up.
Now to what I?ve found out. My 467 baler has 567 chains & sprockets, That makes my chains size 80 not 60 and of coarse the sprocket are heavier than the 467. Looks like I might have to shorten the chain going to the top roller. Does anyone know the length of the two chains or how much I need to take out.
I have an operators manual and I know, I need a service manual.
Now to what I?ve found out. My 467 baler has 567 chains & sprockets, That makes my chains size 80 not 60 and of coarse the sprocket are heavier than the 467. Looks like I might have to shorten the chain going to the top roller. Does anyone know the length of the two chains or how much I need to take out.
I have an operators manual and I know, I need a service manual.