Dunham-Lehr Harrigator/cultigator question

I'm replacing the spike teeth on my Dunham Lehr harrigator/cultigator or whatever it's been called. I'm only replacing the two front rows. Got all my parts from Shoup. Their spike teeth are 3/4" by 11". My question is when installing each spike tooth, clamp & nuts how far below the frame should they be? 4 inches, 5 inches, 6 inches? What would they be set from the factory or a common setting? As always, any and all assistance is greatly appreciated.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top