Replacement Blades for Rhino TM100 finish mower

sixbales

Member
Howdy,

I have a Rhino TM100 finish mower. This is a 100" mower that uses three 35" blades. Rhino Replacement parts for it are expensive but replacement blades are ridiculously priced. They are asking $115 per blade plus shipping. So, for a set of 3 replacement blades I am looking at about $400.

Do any of you know of an aftermarket source for these blades?
 
Check this out on ebay.

http://www.ebay.com/itm/3-blades-for-100-Rhino-FM100-finish-mowers-replaces-00769347-RH00769347X-/261959821549?hash=item3cfe05a8ed
 
Or this:

www.ebay.com/itm/3-blades-for-100-Rhino-FM100-finish-mowers-replaces-00769347-RH00769347X-/261959821549?hash=item3cfe05a8ed
 
I have a TM60. Blades for mine are about 30 bucks each at the dealer. I have not tried aftermarket blades because the rhino blades are much heavier than I have seen anywhere else. Obviously your blades are much longer than mine but that price sounds out of line. I would check at another dealer just to be sure on that price or it could be just that low of a volume part therefore high price.
 
Thanks Bill and Gary,

I checked with another dealer, same price $117 per blade. I also checked the blades for the FM100 on ebay. The FM100 blades are 1/2" shorter and will probably eliminate overlap/leave streaks of uncut grass.

So, I guess I'll keep using the current blades till they're worn down to a nubbin. Or till I find an aftermarket replacement.

Thanks again for your response.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top