Possible Allis Chalmers Plow Help Identify

No name cast in the beams and there is a 1450 stamped in the right front.
mvphoto25055.jpg


mvphoto25056.jpg


mvphoto25057.jpg


mvphoto25058.jpg
 
Here are some more pictures. The depth handles are not adjustable. The right hand depth adjustment gauge is cast iron instead of cut iron. The layes/shares have a bushing on the bottom of them that has a hooked rod that has a knob on it to hold them into place.
a197119.jpg

a197120.jpg

a197121.jpg

a197122.jpg

a197123.jpg
 
The knobs that tighten the draw bolts to secure the shares were used by Allis. I do not know that it is an allis for certain though.
 
Have never seen a clutch lift wheel like that on an Allis but still could be different model.
 
I did some more looking and most of the Part #'s start with SG. Like SG257L. The nut cover on the clutch wheel side has F&H cast in it so might not be a original wheel to this machine.
 
Do you know what model it might be then? Some things just don't look to be hooked correctly on it. I would like to get it fixed up some. I know its not a B model Case. I have 5 B models and they are different.
 
Ok Thanks. Well will have to just see what other people are thinking and see what comes about. Maybe I will find something if I start taking it apart.
 
That's definitely an Allis style attachment for the shares, but the clutch looks IH and the tailwheel looks like it's off an Oliver. I've never seen anything quite like it.
 
I did see that the part number on the
mold board was 309214. Also there is a few parts with SG at the beginning of the part #
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top