Box blade help

Skeeter102 · Jul 23, 2015

I have a six foot box blade that I got at tractor supply. I'll try and attach a link below.

The issue is the pins that hold the rippers in like to pop out every so often. I have already lost one ripper. Anybody got a solution to keep these in?

http://www.external_link.com/tsc/product/countyline-box-blade-6-ft-working-width

wellmax99 · Jul 23, 2015

my old box blade is an atlas.
the diggers are locked in with a pin, it does not show in the picture but the pins have a hole and a clip goes through the pin. the locking pins are in kind of a difficult place to work, but they have never come out.
I push the clip completely through the pin so they can not be pulled out.

so far I have never lost a digger, have bent one or two.

does your locking pins have holes, if so, you could put a piece of wire through the hole tying it or wrapping it,
but your locking pins must be secured in someway or you are going to continue to lose diggers.

Box blade help

Skeeter102

Member

wellmax99

Member

Similar threads