Currently using a 3pt PTO rake (old Minneapolis Moline). Would like to get a double rake to feed the round baler better but will still need a single rake for the square baler. Toying with making a hitch and getting a ground driven pull type rake.
Any input, anyone done this. Seems to me the hitch would have to allow for up and down movement (such as when the 3pt rake is up for transport) and as long as 3pt rake frame is strong enough to pull from (at an offset so the pull type rake is out to the end of the 3pt rake) it should work.
Any input, anyone done this. Seems to me the hitch would have to allow for up and down movement (such as when the 3pt rake is up for transport) and as long as 3pt rake frame is strong enough to pull from (at an offset so the pull type rake is out to the end of the 3pt rake) it should work.