Massey Ferguson Plow ID

dieselmech86

New User
I need some help identifying an old Massey Ferguson plow I'm about to start restoring. I have a 58 Massey Ferguson 50 that this plow was purchased with originally. I'm trying to find decals for it. They seem
to be much smaller than what goes on a tractor. Being able to show this plow behind the tractor it was purchased with originally by my grandfather would be something to show. I've attached some pictures of it
to help ID it. Thanks for the help.

http://s13.photobucket.com/user/stlranger/media/Mobile%20Uploads/IMAG0518.jpg.html

http://s13.photobucket.com/user/stlranger/media/Mobile%20Uploads/IMAG0519.jpg.html

http://s13.photobucket.com/user/stlranger/media/Mobile%20Uploads/IMAG0520.jpg.html
 
What you may have is a Ferguson 12 AO 28 or 14 AO 28. It looks the same as the one I have.See if you have rivet holes where tag is on plow in picture. 58 was the first year for MF so this could be a carry over. The MF plows I have seen is built a little different with the brace from front to back being a pipe. They didn't have decals just tag. George Bradish may have decals if you want MF on it.
a192551.jpg

a192552.jpg

a192553.jpg

a192554.jpg
 
mine is a MF62 3x12" plow

looks similar to yours, mine does not have as many options as yours.

However, it does have new points and new coulter blades.
plows great and follows the tractor TO35 like a puppy.
a192566.jpg

a192568.jpg
 
tag is hard to read in this low light.

I made a couple of pictures, but they did not turn out very well.
but I assure you it says MF62, it must be one of the last one's made before they changed to trip plows.
a192601.jpg

a192602.jpg
 
I've seen the 62 but the ones I've seen had the pipe on the top brace to rear of plow. The two look the same in pictures. Who knows what the company did in those last few years.
 
There is no tag. I don't see holes on the left upright where one would have been either. There's only the numbers stamped on the right upright and the Massey Ferguson decals on the back. This plow was purchased new by my grandpa in 1960 with the Massey Ferguson 50. We still have the original bill of sale.
 
I suppose I should mention the plow and tractor were purchased in 1960. The tractor (by serial number at least) is a 58. We still have the original bill of sale from when my grandpa purchased the tractor with this plow in 1960.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top