Oliver 2 bottom plow rim

ryanwheelock · May 20, 2015

I have an Oliver 2 bottom roster comb lift plow that I restored years and years ago but has been sitting for a lot of years. Went to move it and the one rim is rusted beyond repair. Need to find a new or used rim for it but having a hard time locating one. It is a 6 lug with a 5" lug spacing. All I have found from my parts catalogs and the tire shops are rims that are 6 lug with 6" lug spacing. Anyone have a used rim or know of a supplier to buy a new one?

Mark-Ia · May 20, 2015

Find a rim the correct size and take the center out of your rusted rim and weld it in place.

DeltaRed · May 20, 2015

Agreed with Mark...Just weld your center into a rim.BTDT. Not at all hard to do.

JMS/.MN · May 20, 2015

Wire brush the interior of the rim...welds should show up. Usually two per section, eight per rim. I drill them out, usually 1/2 or 5/8 inch, beat on the center and it comes out.

ryanwheelock · May 22, 2015

Ya that's my last resort, Did it before on other odd balls. cant believe cant find a new or used rim with that bolt pattern.

Oliver 2 bottom plow rim

ryanwheelock

Member

Mark-Ia

Well-known Member

DeltaRed

Well-known Member

JMS/.MN

Well-known Member

ryanwheelock

Member

Similar threads