Graham Hoeme chisel shank

4200m · Apr 16, 2015

I need a Graham Hoeme chisel shank to replace one I broke on my grandfather's chisel. It has a 600 stamped on it. If anyone know where I can find one please let me know.

Dick2 · Apr 17, 2015

Probably a lot of those old chisel plows parked in the weed or woods around the Midwest, maybe some in junkyards too. Just keep searching for the parts.

Tim(nj) · Apr 17, 2015

W&A manufacturing makes some shanks for the G-H chisels. Maybe they have the one you need?
W&A

LarryH · Apr 20, 2015

we ahev one call link_disallowed for details ask for larry thanks

4200m · Apr 20, 2015

Still looking. The shank measures 33 inches around the outside curve of shank. I've found lots of shanks just not one this short.

4200m · Apr 20, 2015

Here's a picture

4200m · Apr 20, 2015

Pictures

4200m · Apr 20, 2015

Called them and they only make one 42 inches long no 33 inch

4200m · Apr 20, 2015

Thanks Larry looking for a shorter one

Leroy · Apr 22, 2015

Did not realize they made a mounted model. Around the farm all my 71 years and only ever seen one and it was a pull type with a hand lift lever on each side, no hydrolicks and did not look to have as much ground clearance as a field cultivator. Could see no way that machine could work. It was at a consignment sale years ago, remember it because of the bad looking design. Could not have worked over 6" deep. Never heard of them before I got on this site about a year after it was formed except for that one.

Graham Hoeme chisel shank

4200m

New User

Dick2

Well-known Member

Tim(nj)

Well-known Member

LarryH

Member

4200m

New User

4200m

New User

4200m

New User

4200m

New User

4200m

New User

Leroy

Well-known Member

Similar threads