Tiller/Cultivator size for a ford 1320

MICHAEL BINGHAM · Mar 11, 2015

I am trying to figure out what the largest tiller size my ford 1320 can handle. I don't want to get anything bigger than the tractor will actually handle easily.

johnpop1 · Mar 11, 2015

2 or 4 wd? how deep? how many teeth? old ground or
new? hills or flat? weights? There are many
factors to consider. Probably no more than 5-5 1/2
feet wide would be my guess.

stevob671 · Mar 11, 2015

I have a 50" Deere on my 1210 with hydro. Not sure how low you're geared but I'd say 5' would be about right. See if there's a rental place you could try one out.

MICHAEL BINGHAM · Mar 12, 2015

(quoted from post at 14:03:04 03/11/15) 2 or 4 wd? how deep? how many teeth? old ground or
new? hills or flat? weights? There are many
factors to consider. Probably no more than 5-5 1/2
feet wide would be my guess.

My goal is to get the soil as loose and broken up as possible so I figure the more tines the better.

4WD...As deep as possible 10-12" if I can....both old and new ground(I plan to break new ground this year but likely won't in the future, just re-till the open ground...flat terrain.

Thanks

MICHAEL BINGHAM · Mar 12, 2015

How many horsepower is available to the tiller? I believe I am working with 17 tops.

Thanks

Tiller/Cultivator size for a ford 1320

MICHAEL BINGHAM

New User

johnpop1

Member

stevob671

Member

MICHAEL BINGHAM

New User

MICHAEL BINGHAM

New User

Similar threads