5150robert
New User
This is a front end loader off of an 8 in Ford tractor it is complete with hydraulic pump and reservoir. I am trying to find out if this loader is usable on a 1948 8N...
- Thread starter 5150robert
- Start date
Tony in SD
Well-known Member
Not sure how to answer this but ill try. 8N to 8N should work
but the first 8N wasn't made until 1947. So I'm thinking it might be a 2N. And Im not sure if the loader would fit.
but the first 8N wasn't made until 1947. So I'm thinking it might be a 2N. And Im not sure if the loader would fit.
9N made 1939 to 1942
2N made 1942 to 1947
8N made 1948 to 1952
All the "N" tractors are pretty much dimensionally the same so I would think a loader would fit any of the 3 assuming it fit any one of them to begin with. Really there is very little difference between a 9N and a 2N. Basically Ford being the sheister he was got the model # changed so he could circumvent price freezes during the war and raise prices on an otherwise identical tractor by claiming it was a new model. 8N saw more significant improvements but still fundamentally similar.
2N made 1942 to 1947
8N made 1948 to 1952
All the "N" tractors are pretty much dimensionally the same so I would think a loader would fit any of the 3 assuming it fit any one of them to begin with. Really there is very little difference between a 9N and a 2N. Basically Ford being the sheister he was got the model # changed so he could circumvent price freezes during the war and raise prices on an otherwise identical tractor by claiming it was a new model. 8N saw more significant improvements but still fundamentally similar.
8n to 8n then yes they will work. 9n and some 2n had
a different axle carrier so a different front
bracket may have been used. Can you post or email me
a photo of the tractors and loader. if you are
buying the loader and it's a front pump you will
also need the front crankshaft pulley to be included
in the deal.
Kirk
a different axle carrier so a different front
bracket may have been used. Can you post or email me
a photo of the tractors and loader. if you are
buying the loader and it's a front pump you will
also need the front crankshaft pulley to be included
in the deal.
Kirk
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy