International Harvester Radiator Identification Needed

Hello-

I was at an auction this weekend and bought a pallet full of parts. In the pile was an International Harvester radiator with a shroud over the front. Almost looks like it was on a baler engine or in a combine. I called an IH dealer in my area, they could not help with the part number, didn't show up anymore. Was hoping somebody can identify what this radiator may fit. The IH part number on the radiator is 610299R91, made at the Melrose Park Works. please see pics below.




mvphoto12623.jpg


mvphoto12624.jpg






Someone must have an old parts book that could identify this. Thanks in advance!

-Jesse
mvphoto12628.jpg
 
(quoted from post at 13:38:02 11/03/14) It looks like it came off of a early model IH
combine, i.e., 101 or maybe even a 403

after doing some google image searches, I think this is off a model 201 mccormick windrower. Says the windrower has the c-135 engine. Isn't this the same size motor as the farmall H?
 
Thanks for all the comments everyone! I guess my question would be now, is there ay value in this radiator with the screen? I do not own anything it will fit. Should I try selling it or scrap it? This radiator was on a pallet of other stuff that I wanted at the auction and came with it. Thanks !


-Jesse
 
Knowing how IHC did things back in the day, this radiator could very well possibly fit 2 or 3 things if you take the screen off. For instance, they likely used the same radiator for whatever used the same engine ect. Screen is only needed for the particular thing it came off of, combine or whatever. If it is useable and holds water, figure out what it will fit and sell it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top