Front Loader from an Open to Closed Hydraulic System

I just bought a John Deere 2350 4wd and am planning on using my Allied 595 loader (now on my Ford 6610)on it. Currently I am using my one (1) remote for my loader. I also use a wood splitter on my 6610 and need to disconnect the loader when using the splitter.
I understand the difference between "Open" and "Closed" systems just not what I need for loader controls.
The dealer plumbed the 2350 for a loader and mentioned that he will install a power beyond valve.
I am using a 3 spool control valve now.
How can I tell whether my controller now on the open center system will work on the closed center system?
Thanks,
 
(quoted from post at 07:24:55 09/01/14)
The dealer plumbed the 2350 for a loader and mentioned that he will install a power beyond valve.
I am using a 3 spool control valve now.
How can I tell whether my controller now on the open center system will work on the closed center system?
Thanks,

The hyd FEL valve that was used on the Ford will not successfully operate on the JD. Easy way to determine if a valve will operate on a JD is aim open return hose in a bucket,pressure hose attached to JD hyd's and with valve control levers in neutral,start engine and NO OIL should exit return hose. Below is the correct way to attach FEL valve to a JD CC utility tractor.
mvphoto10607.gif
 
Many valves can be converted from OC to CC by the
addition of a special plug or fitting specific to
that particular valve. Check with the manufacturer
of your spool valve, or an informed retailer of
hydraulic components.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top