IH Model 35 Rake

Part Time Pete · Aug 20, 2014

I have an IH model 35 rake with rubber teeth. As they go bad, I would like to replace them with steel teeth. Are they interchangeable?
Thanks
Pete

DeltaRed · Aug 20, 2014

Yes.But you will need the hold down clip.I use the 'universal' rubber tooth from Shoup.A bit different,but a lot cheaper and work just fine.Btw,I have both 35 and 15 rakes,same will work on both.

Part Time Pete · Aug 20, 2014

Thanks - I'll check it out. i haven't had it long but it seems to be a well built rake
Pete

Bret4207 · Aug 20, 2014

Some of those IHC rakes you have to change the stripper location between rubber and steel teeth, or so the manual says.

Part Time Pete · Aug 21, 2014

Bret
I think you're right. I tried the steel teeth and they bolt on fine except for the ones next to the strippers - those one rub.
I didn't think to check if they can be relocated. I'll check tonight
Thanks
Pete

IH Model 35 Rake

Part Time Pete

Well-known Member

DeltaRed

Well-known Member

Part Time Pete

Well-known Member

Bret4207

Well-known Member

Part Time Pete

Well-known Member

Similar threads